Where solar meets structure. Our panels boast a strength far beyond typical glass panels, a performance made possible through carbon composition and inventive manufacturing. Designed to withstand heavy loading, they can be tossed into the bottom of a trunk, used as a makeshift bench, even stood on. Such rigidity seems impossible at just 1/4 of the weight and thickness of standard glass panels - a drastic upgrade made without any sacrifice in durability or output.
Our panels can brave a fall from tens of feet in the air with little to no impact on performance - in fact, they are so light that you would have no problem catching one. Our standard 100W panel weighs just 2.3kg (5.4lb), compared to glass panels at 15kg (33lb). This radical improvement is made possible through LightLeaf’s signature layering system and fine materials.
Uncompromising rigidity, seamless craftsmanship, and premium materials contribute to our panels’ tolerance for harsh weather. Tested over several weeks through a true Canadian winter, we guarantee our solar panels will stand unflinchingly in the face of hail, snow, wind, and rain, powering you through any extreme.
The high-performance materials used to construct our panels are unlike any in the industry. A deliberate use of aerospace materials results in our solar panels' signature blend of rigid, light, and thin. SunPower monocrystalline cells maximize power output at 25% efficiency, while polycarbonate front sheet provides superior UV protection and abrasion resistance. Our ROC Technology® creates an impact resistant shield with minimal performance loss following impact, a necessary feature for rough outdoor use. Finally, Entropy Resins’ bio-based epoxy holds everything in place with a consideration for energy conservation and minimizing harmful byproducts.
The high-performance materials used to construct our panels are unlike any in the industry. A deliberate use of aerospace materials results in our solar panels' signature blend of rigid, light, and thin. SunPower monocrystalline cells maximize power output at 25% efficiency, while polycarbonate front sheet provides superior UV protection and abrasion resistance. Our ROC Technology® creates an impact resistant shield with minimal performance loss following impact, a necessary feature for rough outdoor use. Finally, Entropy Resins’ bio-based epoxy holds everything in place with a consideration for energy conservation and minimizing harmful byproducts.
The high-performance materials used to construct our panels are unlike any in the industry. A deliberate use of aerospace materials contributes to our signature blend of rigid, light, and thin. SunPower monocrystalline cells maximize power output at 25% efficiency, while polycarbonate front sheet provides superior UV protection. and abrasion resistance. Our ROC Technology® creates an impact resistant shield with minimal performance loss following impact, a necessary feature for rough outdoor use. Finally, Entropy Resins’ bio-based epoxy holds everything in place with a consideration for energy conservation and minimizing harmful byproducts.
Rigid Overlay Composite: our ultramodern take on solar panel design, maximizing functionality, durability and elegance. The table below compares 100W panels across three standards.
5.3lb (2.3kg)
High, with carbon-cored structure tolerant to loading.
No
Seamless. Flush installation with matte black cells and carbon weave finish.
Impact tolerant, tested to endure abrasion and harsh weather.
Factory-grade integration, dependable locking mounts, and kickstand for remote charging.
20-33lb (9-15kg)
Intolerant to loading.
Yes
Bulky and sharp-cornered. Does not install flush with curved structures.
Susceptible to shattering and impact.
Restrictive and inconvenient - substantial hardware required.
5.3lb (2.3kg)
High, with carbon-cored structure tolerant to loading.
No
Seamless. Flush installation with matte black cells and carbon weave finish.
Impact tolerant, tested to endure abrasion and harsh weather.
Factory-grade integration, dependable locking mounts, and kickstand for remote charging.
6-11 lb (2.5-5kg)
Intolerant to loading.
Yes
Pasted-on nature appears impermanent. Adhesives and tapes blemish structures they are applied to.
Susceptible to wind-induced flapping damage. Flexing often breaks/cracks cells.
Tape, adhesive, velcro and ropes necessary. Not removable for remote charging.
